Allen-Bradley 1746-NI16V Analog Input Module Progmable Logic Controller Module

The 1746-NI16V belongs to the Allen-Bradley SLC 500 Analog Input Module series. The Allen-Bradley 1746-NI16V SLC 500 Analog Input Module communicates with an SLC 500 processor through a parallel rear-facing interface. This module receives its electrical power from the system’s central SLC 500 power supply via a backplane. The acceptable operating temperature range of the Allen-Bradley 1746-NI16V SLC 500 Analog Input Module runs from -25 degrees to 60 degrees Celsius or -13 degrees to 140 degrees Fahrenheit. However, the non-operating temperature range runs all the way from -40 degrees to 85 degrees Celsius or -40 degrees to 185 degrees Fahrenheit.

The ratio of the Allen-Bradley 1746-NI16V SLC 500 Analog Input Module runs from a minimum of 5% relative humidity to a maximum of 95% (Non-condensing). The backplane current at 5 Volts is 125 milliamperes. At 24 Volts, this module's backplane current is 75 milliamperes. The backplane power consumption of this module is a maximum of 2.425 Watts. This will be 0.625 Watts at 5 Volts Direct Current and 1.8 Watts at 24 Volts Direct Current. Removing or inserting a module while any power source is connected may lead to dangerous electrical arcing. For this reason, please remember to disconnect all sources of power before removing or inserting this module. The Allen-Bradley 1746-NI16V SLC 500 Analog Input Module features a total of 16 separate input channels and a total resolution of 16-bits. The common mode voltage range of this module is +/- 10.25 Volts compared with the analog common terminal.