IC695ALG626 GE Component module of the PACSystem RX3i Programmable Automation Controller
Specifications for PLC Programmable Logic Controller IC694MDL660
Brand GE Fanuc
Manufacturer GE Fanuc
Manufacturer GE Intelligent Platforms (Former); Emerson Automation (Current)
Series PACSystem RX3i
Series PACSystem Rx3i
Part Number IC694MDL655
Product Description Discrete input module
No of Channels Thirty-Two (32)
Part Number IC694MDL660
Type Input module
Inputs 32
No. of output groups Four (4)
No. of groups Eight (8) channels per group
Rated Voltage 24V DC
Channels per group Eight (8)
Wiring configuration Positive / Negative Logic
Input signal range 0-30 VDC
Input Voltage Range 0-30 VDC
Isolation: Field to Backplane (optical) -250 VAC continuous; 1500 VAC for one minute; Group to Group - 250VAC continuous; 1500 VAC for one minute
Nominal Input voltage 24 VDC
Isolation 250V AC and 1500V AC per minute
Nominal input voltage 24 VDC
Input current 7.0 mA at rated voltage
Current draw 195 mA @ 5VDC; 224 mA @ 24 VDC
Input Filter Times 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms
Maximum inrush current 4.78 A For 10 ms
On State Voltage 11.5 - 30 VDC
Power Consumption 300 mA
Off state voltage 0 - +5 VDC
Diagnostic Tools Yes. Terminal block that reports to CPU
Current draw 300 mA
On state current 3.2 mA
Input Current 7 mA per channel
Input Filter Times 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms, selectable per module
Off state current 1.1 mA
Compatibility RX3i CPU 2.90 or greater
On response time 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting)
On response time, typical Depending on the selected filter time
Off response time 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting)
On response time, maximum Depending on the selected filter time
Product Lifecycle Status Active
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
The IC694MDL660 is a component module of the PACSystem RX3i Programmable Automation Controller (PAC) family This module is originally produced by GE Intelligent Platform, now currently under Emerson Automation. This module is a high-density, Thirty-Two (32) point input channel with group isolation specifically, Four (4) input groups of Eight (8) channels each. The IC694MDL660 is designed to accept input signal voltage of 0-30 VDC with nominal input of 24 VDC along with an input current of 7.0 mA per point at rated voltage. Each channel of this module has an On-state voltage range of 11.5-30 VDC while the Off-state voltage is 0-5 VDC. The maximum On-state current is 3.2 mA while the maximum Off-state current is 1.1 mA. Configurable filter times may also be selected in order to fine-tune each input channel. The selectable input filters such as 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms, and 100ms enable the module to ignore false negative and false positive detection which are normally caused by environmental and mechanical factors such as dust and debounce. The selected filter settings become the On and Off response time of the input points. This module requires the use of high-density terminal blocks particularly Box-style with catalog number IC694TBB032 or Spring-style with catalog number IC694TBS032 front Terminal Block. Each input channel has dedicated input LED indicators that depict the logic state of the device. Logic 1 is depicted when the LED is illuminated indicating that the input channel is actively receiving input current otherwise, the LED is inactive.
The IC694MDL660 input module is a logic input module that has been manufactured by GE Fanuc Automation and included in the RX3i PACSystem series. It is made to be used with the RX3i racks. This module comes with 32 inputs that can operate under positive or negative logic. These inputs are divided into different groups and each of them can operate at a maximum voltage of 30 Volts. The 4 groups of inputs each have their common connection. The isolation voltage rating between these groups goes up to 250 Volts AC continuous and up to 1500 Volts AC for 1 minute. The GE Fanuc Automation IC694MDL660 logic input module comes with a voltage of 24 Volts DC and each of the inputs operates with an input voltage range that goes from 0 to 30 Volts DC.
The GE Fanuc Automation IC694MDL660 logic input module comes with selectable input filter times that go from 0.5 milliseconds to 100 milliseconds. The on and off response times will be set after the users have established a filter time. The module has a power consumption of 300 milliamps, including all the inputs. The GE Fanuc Automation IC694MDL660 logic input module includes a diagnostics tool that consists of a terminal block that reports directly to the RX3i CPU. The module has a current of 7.0 milliamps per input at the rated voltage. One of the requirements for the correct application of this module is that it needs to be attached to an RX3i CPU that is release 2.90 or later. It must not be used with a Series 30-90 CPU since it is not compatible. The resolution of the module is 48 input bits and 16 output bits.
Similar Products OF PLC Programmable Logic Controller IC695ALG626 IC3600AVRA1 REFERENCE BOARD
IC3600AVSA1 VOL REL BOARD
IC3600AVSB1 REFER TO ARGO/HOUSTON
IC3600AVSD1 VOL REL BD
IC3600CCCA1 ACCT. RECTIFIER
IC3600DAEA1 IC3600DAEA
IC3600DBMA1 CIRCUIT BOARD ASM
IC3600DCDA1 IC3600DCDA
IC3600DCWA1 CARD-DELAY-&-CROWBAR
IC3600DCWB1 CARD-CROWBAR
IC3600DCWC1 IC3600DCWC
IC3600DEXB1 EXTENSION CARD
IC3600DGRA1 IC3600DGRA
IC3600DIGA1 IC3600DIGA
IC3600DIVA1 CARD-PART OF ICR607D104A
IC3600DJBB1 IC3600DJBB
IC3600DLIG1 DIO INTERFACE IC3600DLIG
IC3600DLIJ1 DLC AIR INTERFACE IC3600DLIJ
IC3600DLIK1 SPEEDTRONIC INTFC IC3600DLIK
IC3600DLIL1 DIO INTERFACE IC3600DLIL
IC3600DLPC1 DATA LINE PULL UP
IC3600DPSA1 CRD-15V-POWER-SUPPLY
IC3600DPSB1 CRD-15V-POWER-SUPPLY
IC3600DRDC8 CARD-RELAY-DRIVER
IC3600DRGA1 SPEEDTRONIC
IC3600DRGB1 CARD-PART OF ICR607D104A
IC3600DSPB1 CARD-PART OF 68B9453211
IC3600EPSA1 REGULATOR IC3600EPSA
IC3600EPSAB1
IC3600EPSB1 100V REGULATOR IC3600EPSB
IC3600EPSC1 INVTR. DR. IC3600EPSC
IC3600EPSD1 28V PS. IC3600EPSD
IC3600EPSE1 INDICATOR
IC3600EPSE2 INDICATOR CARD IC3600EPSE
IC3600EPSH1 POWER SUPPLY BD IC3600EPSH
IC3600EPSK1 MODULE
IC3600EPSM1 CB-75W-PWR-SUPPLY-CO
IC3600EPSN1 12V,28V POWER SUPPLY
IC3600EPSN3 POWER SUPPLY BD
IC3600EPSN4 CRD-15V-POWER-SUPPLY
IC3600EPSS1 50VTO-12V REGULATOR IC3600EPSS
IC3600EPSU1 MODULE
IC3600EPSV1 POWER SUPPLY IC3600EPSV
IC3600EPSW1 REGULATOR BOARD IC3600EPSW
FAQ for IC694MDL660
1. What are the selectable filter time available to the IC694MDL660?
Selectable filter times are 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms.
2. What is the input voltage ange of the IC694MDL660?
The IC694MDL660’s input voltage range is 0-30 VDC.
3. How many input channels does the IC694MDL660 have?
The IC694MDL660 has Thirty-Two (32) input channels.
1. What is the compatible removable terminal block for the IC694MDL660?
The IC694MDL660 is compatible requires use of either Box-style with catalog number IC694TBB032 or Spring-style with catalog number IC694TBS032 front Terminal Block.
2. Are LED status indicators available to the IC694MDL660?
Yes. There are 32 status LED indicators available to the IC694MDL660.
3. What is the input current of the IC694MDL660?
The IC694MDL660 input current rating is 7.0 mA.
FAQ
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
|
|
IC695ALG626 GE Component module of the PACSystem RX3i Programmable Automation Controller Images
|
